Gelli Plate cards

Hi, Sanna here today with my last May project. Remember the gelli prints I created for this canvas? I had only used half of them so I had plenty to create some cards from. If you want to see how I created those backgrounds, go back to this post.

Since the prints were already very bold in colour and pattern, I just glued them down on the card bases and added only a few decorational elements. I also added some crackle paste thru various The Crafter´s Workshop stencils here and there on the cards. Here is what the finished cards look like:

All the additional embellishments are various random pieces from my stash. There are also some resin embellishments on some cards. I created those while I was making my April jewellery projects (see details on this blog post).

I used all kinds of little elements I had at home:

And in the end I had all these molds to play with. On some of the resin embellishments I have used a silver Alumilite metallic powder in combination with the Amazing Clear Cast resin and the Alumilite red or blue dye ink. Other resin pieces I created without the silver powder. I loved creating these molds and my custom resin pieces. Now I have plenty of those ready to be used on some future projects too. 

Have fun creating,

xoxo, Sanna

Tweet

May Kit Journal Page with Gelli Plate prints and Stencil Girl:)

Hello again!! 

I'm loving our May kit so here I am up again with my next project...a spread in my 

Gratitude Journal.

I'm so grateful for good friends...friends that know all your flaws and love you just the same:)

For this project, I used 

Oil Pastels

Paper Artsy Fresco Finish Paint (beach hut) 

Stampendous, n*Studio Stamp Set 

Stencil Girl typewriter stencil 

Scarlet Lime pen 

Uni-ball Signo pen (white)

Pitt multi-liner pen (black, XS)

Gelli plate prints (from previous May project)

Super heavy gesso

So, I started by adding blocks of color with the oil pastels.

Next, I brushed on (with a foam brush) the Fresco Finish Paint

It's transparency allows the beautiful color beneath to come through.

I loved using the Fresco paints with my Gelli plate, so I made plenty of prints during my previous card and envelope project this month.  You can see how I created these here.

I tore them into pieces and applied them to the pages with matte medium.

Next, I used super heavy gesso to stencil this cute Stencil Girl typewriter. 

I added bits and pieces of detail with the my three favorite pens...

Uni-ball Signo (white) , Scarlet Lime, and Pitt multi-liner (XS)

It's all in the detail:)

(except for the pencil lines I forgot to erase!)

I used a Brilliance ink pad in moonlight white to apply the "chain link" stamp

Hope you feel inspired to journal with our great May Kit!!

As always,

It's a joy to share with you!

Sue

Tweet

"Dream" canvas and another simply stencils idea

Hi there! Today I´d like to share with you a little step-by-step tutorial on a canvas I created with the May kit. 

I started with the vellum paper and used several tones (check out the store for more colours) of Fresco Finish paints in combination with The Crafter´s Workshop stencils on my Gelli Plate. I kept on adding different paint colors and stencils over each other and also used one of the stamps by Nathalie Kalbach to create more layers. These are the finished vellum pieces for my canvas.

Then I went along and added some stamp images (N* Studio stamps from the kit) over the prints. I used a dark grey chalk dye ink for this purpose. 

Then I cut the pieces in half (I am going to use the other half of the gelli prints on another project later) and teared the vellum paper edges for a more grungy look.

I have to confess that I was so into creating at this point, that I forgot to take another picture of what I did next. But it is pretty simple, so I am sure you will get the idea even though I don´t have a photo. I now cut these pieces in half again and rolled them into tiny vellum rolls (I used a regular glue here). Next I took a piece of thin wire and wrapped some of it around each roll for additional detail. Then I left them to dry.

Next I decorated the canvas and first covered it with white gesso, let that layer dry properly and then applied a layer of crackle paste thu a stencil onto the canvas. Then I just let that layer dry a while too. 

Next I applied Fresco Finish paints over the crackle paste. I used "Beach Hut", "Mermaid" and "Guacamole" tones. I used a regular paint brush for applying the paint and when the canvas was all covered I sprayed some water over the surface and then let it dry again. 

After the paint was all dry I grabbed some Lindy´s Stamp Gang color sprays and sprayed teal and green tones over the layer of paint. I let the mists drop/run freely across the canvas as I really like this effect. After this layer was dry, I grabbed some golden iZink and white Liquitex Ink and did the same with those. I love the droplet look and the white and gold inks add a really nice contrast to the background. 

Next I just stamped some black patterns - using on of the N* Studio stamps (from the kit) - onto the background around the area where my vellum rolls would later be. There are also some black ink splatters here and there. I made those with Glimmer Glaze. Then I just glued the vellum rolls down onto the canvas and added the decoration. This is how the finished canvas looks like:

and here are some close-up photos for you:

I hope you have enjoyed this little step-by-step. The stencils I used for the Gelli Plate prints are by The Crafter´s Workshop, just in case you were wondering. The embellishments are all from previous Frog Dog Studio kits.

Have fun with your kit!!!
xoxo, Sanna

Tweet

Jewels in the Sand...

Hello creatives! Susan here to share a special project combining Amazing Crafting Products and Frog Dog Studio – our Partners "In-Crafting". Last weekend I took a little road trip north up to the Daytona Beach to visit with family and have a meetup with ACP Creative Team member Brenda who was vacationing in Florida for the week. All things worked out – including the weather for a perfect weekend at the beach!

This May Mixed Media Kit is the perfect mix of colors and products to create a summer getaway keepsake. Please grab a cuppa {and perhaps a snack} this is a bit lengthly with techniques I'm sure you will be excited to try.

I was so excited to receive the Paper Artsy paints and an add-on of Grunge Paste... if you've used modeling paste – Grunge Paste definitely kicks it up a couple notches.

I have been on a kick of organizing supplies, purging and utilizing projects started but never finished. This project is starting out as plastic shell dishes that I had in my stash leftover from a party from who knows when {yes - it's been that long}. I had started out to make a clamshell shaped book with these and collaged two of them with recycled phone book pages. I need a couple of templates for making my pages and embellishments later on; so I also traced onto a styrofoam takeout box {for it's non-stick qualities} and scrap of cardboard. I repeated the traced shape about 1/8" inside and cut on the inner line to create slightly smaller shape for pages.

 

I began by priming my collaged base using a gesso/paint/glazing medium mix that I prepare so often I mixed a whole bottle of it. I applied this in a dry brush fashion so as to not wet the paper too much; covering enough so the ink from the pages won't bleed through. After the gesso layer was dry, I misted the New Sprout Fireworks Mist on my craft sheet and brushed this onto the shell shapes. This is starting to really come to life now.

Now to add some texture and dimension with the Paper Artsy Grunge Paste. I grabbed some craft sand I have in my stash {I like to combine it with pearlescent glitters for summertime projects} and dumped a little on the craft sheet. I combined a spoonful of the Grunge Paste with the sand and a few spritzes of the New Sprout Fireworks Mist and also the Lindy's Shadow Mists from March Kit. I applied this methodically to build up the highpoints and texture, but not covering the collaged paper entirely. I used my fingers to feather and blend out any hard edges and set aside to dry on a recycled takeout styrofoam box.

I set those aside to dry completely for about an hour then flipped over and sprayed a bit of the two Lindy's sprays and the Fireworks to the interior of each shell. I certainly could have stopped here... but I'm all about the details and bringing my vision of this book to life.

   

Next - bringing out the depth with rouging! I brushed the high points with the Prima Chalk Edger Pastel Peach ink. I love mini ink pads to do this kind of detailing. The small foam applicator fits in small areas and drys almost instantly. I focused on the high points with the peach. In the right photo, the top shell has the peach and the bottom looks flat and monotone.

   

Now for contrast by adding the Pastel Green Prima Chalk Edger ink pad in the low points. This really brought the blue tones out of the collaged paper below and finished off the realistic texture I was going for. I had originally planned to use a can of that texture spray stuff from the hardware store – this worked out so much better than that!

WOW... these really look like weathered old shells found on the beach!

I'm going to be needing some interior pages for my book. ACP Creative Team Member DeeDee Catron invented a new twist on the image transfer technique using Amazing Casting Resin and this project is a good project to give this a try.

   

I have some photos that I took at the beach that I will transfer to the casting resin and when cured will leave me with durable, sturdy pages ready for more mixed media application. Please CLICK HERE to view the how-to on the image transfer process. With 4 laser printed photos prepared sized to fit my shell template, I poured one Tablespoon {1 oz.} of parts "A" and "B" of Amazing Casting Resin. I poured both into a mixing cup and stirred slowly. The casting resin starts out cloudy and milky and will turn completely clear when it's completely combined – then it's ready to pour.

   

I poured some resin onto each photo and spread out across each image to cover completely. This will be a distressed book, so I'm not so concerned with the perfection of flatness of the resin pour. When the resin cures it becomes opaque white. 

   

I started with a thin layer because I want to be able to cut these to the shell shape when done, so I'm prepared to make multiple pours to cover images completely. The left image is after the first pouring; the right is after a second pouring of the Amazing Casting Resin. In hindsight, I will do one photo at a time – the resin heats up and cures faster when adding multiple layers which limits time to manipulate and spread out the resin. 

These are the completely covered images after the third and final pouring of Amazing Casting Resin. The last pour cured faster than anticipated so the backs of my pages are very streaky and distressed – adding to the charm of my shell book.

   

I prepared a shallow dish of warm water and soaked my images. After about 15 minutes, I began the rubbing process to remove the paper to reveal the images below. These images are approx. 5" x 7" so this took a considerable amount of time. I used a 28lb. color copy grade paper {a step up from standard 20lb. bond paper} for my images. I plan to experiment with a cardstock weight paper and see if the removal process eases – for with this paper I used it seems the resin soaked all the way through the paper making the paper seemingly moisture resistant. After much rubbing, sanding and scrubbing, I enlisted my bone folder {one made of actual bone} to use as a scraper to break through the layers of paper fiber revealing my images. The bone folder has a dull edge allowing me to apply some pressure in pressing sideways across the image and not scrape it entirely away. 

Since I used Amazing Casting Resin as the base, the durability of the images is SUPREME! My photos took a considerable amount of abuse to reveal their beauty... and I this was totally worth the labor put in. Just these four images took a couple of hours to remove the paper fiber to my liking. I am grateful to DeeDee for this gift of a technique – I have tried pretty much every image transfer technique, which are far more time consuming resulting in delicate, thin images which are great for layering in collage. Transferring to the Amazing Casting Resin eliminates much of the preparatory steps and gives a beautiful transfer that is durable with an opaque base that is ready for mixed media application on the back. This process was totally worth the time and elbow grease invested, and I look forward to exploring this technique further on different papers and also using Amazing Clear Cast Resin.

With image transfers completed and dry, I hold my template behind the page in front of the light to see where I want to crop my image. Holding the template in place, I trace around the template with a Sharpie, then cut out using my tonic scissors. 

Any visible marker after cutting is removed with rubbing alcohol. I gently sanded the edges and added more distressing to the image with an emory board and sanded the backside of the page to remove the glossy finish. Then I spritzed with the New Sprout Fireworks mist... BAM! This page looks aged and weathered with a pop of color and I repeat with the other three pages.

Inside the shell scoop area I am creating a pocket to hold a mold/cast resin starfish and pieces of shells from my recent trip to the beach. I punched a series of holes using my Crop-A-Dile to wire wrap some beads and pearls from my stash {leftovers from other projects}. I also punched two holes set with eyelets at the bottom of each shell to accept binder rings for assembly. I repurposed some plastic packaging from some embossing folders and cut two shell shapes – distressed and stamped with Nathalie Kalbach n*Studio Stampendous stamps; then added a rub-on distressed border. I layered some shimmery floral mesh and May Arts burlap, added shells and secured items in place with hot glue.

   

On left is collage of shells and blue mesh with a copper die cut shell from my stash. On right, pocket is complete with plastic cover in place. I wire wrapped beads and pearls around the edges. The plastic will stay secure in place wedged under the wire wrapping – allowing access to add more beach found treasures later.

Each of the pages have been accented with the Pumpkin Soup and Beach Hut Paper Artsy Fresco Finish paints and over-stamped using my collection of Nathalie Kalbach n*Studio Stampendous stamps with Fresco Finish in snowflake. These stamps are so wonderful... I had to have the other two sets also.

The backs of each page rubbed with with the Pumpkin Soup and Beach Hut Paper Artsy Fresco Finish paints to bring out the weathered, watery detail. I will add other pix and ephemera to these pages later. This book has room to grow.

The stamping over the image transfers add texture and interest.

   

Using medium book binder rings from my stash, I assembled the book together. I even included a little charm "made with love" from by bead stash completes this treasure from the beach.

I tied some strips of tulle, gold ribbon and sections
of frayed May Arts blue cotton ribbon.

I'm so excited to have completed this labor of love to commemorate my special time at the beach. This is a keepsake I will enjoy adding to – and include my trips to beaches in exotic destinations.

I'm so in love with the end result of this vision I had long ago. Thank you for taking time to stick with me to the end. I hope you are inspired to create your own mixed media keepsake using ordinary items. 

You can find more of my work at the Amazing Crafting Products Blog

or at my personal blog... sbartist : painting in the dark. 

~ Susan M. Brown {sbartist}

Tweet