frog dog studio: Amazing Casting Resin

Hello – it's Brenda Burfeind visiting today from the Amazing Crafting Products Creative Team! Today I am going to show you a technique I hope you will enjoy. Many times I use my products not like they are supposed to be used. I love to experiment and with that let's see what I have to share with you today.

There are still a few April Add-On kits with the Amazing Mold Putty and Amazing Clear Cast Resin... and a birdie told me that it's on Sale in the Frog Dog Studio store {as well as the Alumilite Metallic Powders}.

I received the new Frog Dog Studio May Mixed Media Kit and wasn't quite sure how to use it. There are a lot of cool items in this kit, but for me it was a bit overwhelming. I'm not much of a artist in the sense of drawing and painting. Today I am sharing what I have done with some of the parts and pieces.

In the April Kit we received these awesome acrylic pieces. Of course I had to mold them before using them. You can go here to see a video how to make your molds using the Amazing Mold Putty. I molded this piece with the Amazing Casting Resin and Alumilite Metallic Silver Powder.

I applied the Beach Hut Paper Artsy Chalk Acrylic paint directly to my stamp and pressed my Amazing Casting Resin piece directly onto the stamp upside down and let it dry. Then I used the Pastel Peach Quick Dry Fluid Chalk onto another part of the stamp and pressed my resin piece directly onto it upside down again. The reason I did it this way is so that I could control which part of the stamp I was using, since it is a big stamp.

I just ran my stamp under some warm water soapy after I was finished stamping and it came pretty much clean. The paints do not alter your stamp in any means, just not as gray as it was brand new. You just don't want to let the acrylic paints dry and clog up the detail in the stamp.

Now before I did all this I knew I wanted my piece to have a textured, 3D effect. How was I going to create that texture of the stamp? How about embossing it? I of course did not have any colored embossing powders to match those colors that came with the kit – but last month we also received these fabulous Aumidust Powders. SO off to experimenting again... I combined regular clear embossing powder with the Orange Alumidust and mixed them together.

Eureka!!! DIY Orange Embossing Powder!

Then after I had stamped my image from above, I sprinkled the embossing powder over the resin piece IMMEDIATELY. The Pastel Peach says its quick dry and I didn't know how "quick" drying it was.

Poured the remaining embossing powder back into my container and, then I set the embossing powder with my heat gun. The result is fabulous shimmery detail.

I wanted my piece to shine so I mixed up some of the Amazing Clear Cast Resin and added a layer to dome my piece. You might be curious as to what I have my pendant suspended on... CLICK HERE to see my DIY Doming Platform for resin.

That had to set up and cure for about 24 hours...

and now I have another pendant created all while experimenting.

I hope I've given you some ideas on how to use your products – not the way they were intended... don't be afraid to experiment. Sometimes you may "fail" but I always have fun trying new and different things. I really love the dimension and layers of texture captured in the Amazing Clear Cast Resin.

Thanks for stopping by! I will also be sharing another project on my blog on June 2nd using more of this month's kit. So please save the date and hope to see you at Creativity is a State of Mind.

Until next time, keep experimenting ~ Brenda Burfiend

Hello creatives! Susan here to share a special project combining Amazing Crafting Products and Frog Dog Studio – our Partners "In-Crafting". Last weekend I took a little road trip north up to the Daytona Beach to visit with family and have a meetup with ACP Creative Team member Brenda who was vacationing in Florida for the week. All things worked out – including the weather for a perfect weekend at the beach!

This May Mixed Media Kit is the perfect mix of colors and products to create a summer getaway keepsake. Please grab a cuppa {and perhaps a snack} this is a bit lengthly with techniques I'm sure you will be excited to try.

I was so excited to receive the Paper Artsy paints and an add-on of Grunge Paste... if you've used modeling paste – Grunge Paste definitely kicks it up a couple notches.

I have been on a kick of organizing supplies, purging and utilizing projects started but never finished. This project is starting out as plastic shell dishes that I had in my stash leftover from a party from who knows when {yes - it's been that long}. I had started out to make a clamshell shaped book with these and collaged two of them with recycled phone book pages. I need a couple of templates for making my pages and embellishments later on; so I also traced onto a styrofoam takeout box {for it's non-stick qualities} and scrap of cardboard. I repeated the traced shape about 1/8" inside and cut on the inner line to create slightly smaller shape for pages.

I began by priming my collaged base using a gesso/paint/glazing medium mix that I prepare so often I mixed a whole bottle of it. I applied this in a dry brush fashion so as to not wet the paper too much; covering enough so the ink from the pages won't bleed through. After the gesso layer was dry, I misted the New Sprout Fireworks Mist on my craft sheet and brushed this onto the shell shapes. This is starting to really come to life now.

Now to add some texture and dimension with the Paper Artsy Grunge Paste. I grabbed some craft sand I have in my stash {I like to combine it with pearlescent glitters for summertime projects} and dumped a little on the craft sheet. I combined a spoonful of the Grunge Paste with the sand and a few spritzes of the New Sprout Fireworks Mist and also the Lindy's Shadow Mists from March Kit. I applied this methodically to build up the highpoints and texture, but not covering the collaged paper entirely. I used my fingers to feather and blend out any hard edges and set aside to dry on a recycled takeout styrofoam box.

I set those aside to dry completely for about an hour then flipped over and sprayed a bit of the two Lindy's sprays and the Fireworks to the interior of each shell. I certainly could have stopped here... but I'm all about the details and bringing my vision of this book to life.

Next - bringing out the depth with rouging! I brushed the high points with the Prima Chalk Edger Pastel Peach ink. I love mini ink pads to do this kind of detailing. The small foam applicator fits in small areas and drys almost instantly. I focused on the high points with the peach. In the right photo, the top shell has the peach and the bottom looks flat and monotone.

Now for contrast by adding the Pastel Green Prima Chalk Edger ink pad in the low points. This really brought the blue tones out of the collaged paper below and finished off the realistic texture I was going for. I had originally planned to use a can of that texture spray stuff from the hardware store – this worked out so much better than that!

WOW... these really look like weathered old shells found on the beach!

I'm going to be needing some interior pages for my book. ACP Creative Team Member DeeDee Catron invented a new twist on the image transfer technique using Amazing Casting Resin and this project is a good project to give this a try.

I have some photos that I took at the beach that I will transfer to the casting resin and when cured will leave me with durable, sturdy pages ready for more mixed media application. Please CLICK HERE to view the how-to on the image transfer process. With 4 laser printed photos prepared sized to fit my shell template, I poured one Tablespoon {1 oz.} of parts "A" and "B" of Amazing Casting Resin. I poured both into a mixing cup and stirred slowly. The casting resin starts out cloudy and milky and will turn completely clear when it's completely combined – then it's ready to pour.

I poured some resin onto each photo and spread out across each image to cover completely. This will be a distressed book, so I'm not so concerned with the perfection of flatness of the resin pour. When the resin cures it becomes opaque white.

I started with a thin layer because I want to be able to cut these to the shell shape when done, so I'm prepared to make multiple pours to cover images completely. The left image is after the first pouring; the right is after a second pouring of the Amazing Casting Resin. In hindsight, I will do one photo at a time – the resin heats up and cures faster when adding multiple layers which limits time to manipulate and spread out the resin.

These are the completely covered images after the third and final pouring of Amazing Casting Resin. The last pour cured faster than anticipated so the backs of my pages are very streaky and distressed – adding to the charm of my shell book.

I prepared a shallow dish of warm water and soaked my images. After about 15 minutes, I began the rubbing process to remove the paper to reveal the images below. These images are approx. 5" x 7" so this took a considerable amount of time. I used a 28lb. color copy grade paper {a step up from standard 20lb. bond paper} for my images. I plan to experiment with a cardstock weight paper and see if the removal process eases – for with this paper I used it seems the resin soaked all the way through the paper making the paper seemingly moisture resistant. After much rubbing, sanding and scrubbing, I enlisted my bone folder {one made of actual bone} to use as a scraper to break through the layers of paper fiber revealing my images. The bone folder has a dull edge allowing me to apply some pressure in pressing sideways across the image and not scrape it entirely away.

Since I used Amazing Casting Resin as the base, the durability of the images is SUPREME! My photos took a considerable amount of abuse to reveal their beauty... and I this was totally worth the labor put in. Just these four images took a couple of hours to remove the paper fiber to my liking. I am grateful to DeeDee for this gift of a technique – I have tried pretty much every image transfer technique, which are far more time consuming resulting in delicate, thin images which are great for layering in collage. Transferring to the Amazing Casting Resin eliminates much of the preparatory steps and gives a beautiful transfer that is durable with an opaque base that is ready for mixed media application on the back. This process was totally worth the time and elbow grease invested, and I look forward to exploring this technique further on different papers and also using Amazing Clear Cast Resin.

With image transfers completed and dry, I hold my template behind the page in front of the light to see where I want to crop my image. Holding the template in place, I trace around the template with a Sharpie, then cut out using my tonic scissors.

Any visible marker after cutting is removed with rubbing alcohol. I gently sanded the edges and added more distressing to the image with an emory board and sanded the backside of the page to remove the glossy finish. Then I spritzed with the New Sprout Fireworks mist... BAM! This page looks aged and weathered with a pop of color and I repeat with the other three pages.

Inside the shell scoop area I am creating a pocket to hold a mold/cast resin starfish and pieces of shells from my recent trip to the beach. I punched a series of holes using my Crop-A-Dile to wire wrap some beads and pearls from my stash {leftovers from other projects}. I also punched two holes set with eyelets at the bottom of each shell to accept binder rings for assembly. I repurposed some plastic packaging from some embossing folders and cut two shell shapes – distressed and stamped with Nathalie Kalbach n*Studio Stampendous stamps; then added a rub-on distressed border. I layered some shimmery floral mesh and May Arts burlap, added shells and secured items in place with hot glue.

On left is collage of shells and blue mesh with a copper die cut shell from my stash. On right, pocket is complete with plastic cover in place. I wire wrapped beads and pearls around the edges. The plastic will stay secure in place wedged under the wire wrapping – allowing access to add more beach found treasures later.

Each of the pages have been accented with the Pumpkin Soup and Beach Hut Paper Artsy Fresco Finish paints and over-stamped using my collection of Nathalie Kalbach n*Studio Stampendous stamps with Fresco Finish in snowflake. These stamps are so wonderful... I had to have the other two sets also.

The backs of each page rubbed with with the Pumpkin Soup and Beach Hut Paper Artsy Fresco Finish paints to bring out the weathered, watery detail. I will add other pix and ephemera to these pages later. This book has room to grow.

The stamping over the image transfers add texture and interest.

Using medium book binder rings from my stash, I assembled the book together. I even included a little charm "made with love" from by bead stash completes this treasure from the beach.

I tied some strips of tulle, gold ribbon and sections
of frayed May Arts blue cotton ribbon.

I'm so excited to have completed this labor of love to commemorate my special time at the beach. This is a keepsake I will enjoy adding to – and include my trips to beaches in exotic destinations.

I'm so in love with the end result of this vision I had long ago. Thank you for taking time to stick with me to the end. I hope you are inspired to create your own mixed media keepsake using ordinary items.