Love Your Neighbor...January Limited Edition Kit

Hello!  Today is Dr. Martin Luther King Jr. Day.  My project's theme is the underlying message Dr. King lived his life proclaiming...

"Love Your Neighbor" 

Not just the neighbor living in the house next door, though that is a great start, but all people.

He ultimately gave his life for this cause and his message lives on.

In honor of Dr. Martin Luther King Jr. and the change he peacefully inspired...

Here is today's project tutorial using our January Limited Edition Kit

10x10 Plaid Wood Canvas Panel
12x12 The Crafters Workshop Stencil, Sweet Home
 Tim Holtz Ink Palette
Clearsnap Molding Mat, Table Cloth
Clearsnap Molding Mat, Little Love
Viva Colour Croco Crackling Color, Azure
Clearsnap Donna Salazar, Mix'd Media iNx Stamp Pad, Stormy
238ml Liquitex Super Heavy Gesso
 Color Factory Palette Knife Set
Prima Junkyard Findings, Industrial Lamps
 Clearsnap, Smooch Spray, Ginger Ale
 Clearsnap, Smooch Spray, Cherry Ice

I have had SOOOO much fun with this kit!  It would be hard to pick my favorite product, but a close tie would probably be the Croco Crackling Color and the Clearsnap Molding Mats.

I started by mixing the Super Heavy Gesso with black acrylic paint to achieve a first layer with plenty of texture. I used a palette knife to apply the tinted gesso to an 8 X 10 flat canvas board.

While the gesso was still wet, I used a Clearsnap Molding Mat to press in more texture.

These mats are really great...you can use them to create texture in clay, gesso, Amazing Crafting product's mold putty and more OR use them as stamps with ink!

Make sure you rinse the mats with water right away to assure easy clean up!

After the gesso dried, I decided I wanted a darker black color for the underneath layer that would show through the Crackling paint, so I brushed on some black ink similar to the Liquitex Acrylic Ink found in the other Frog Dog Studio January Kit.

Once dry, I added a heavy layer of the Croco Crackling Color.

HINT: the thicker you apply this, the more Crackle you will achieve.

I used the Clearsnap Molding Mat to apply more texture while the Crackling paint was still wet.

I really love all the texture achieved with all of these products!

Next I used the Phone Book Stamp found in the Exclusive Frog Dog Studio Communication Stamp Set, stamping it onto a piece of white card stock.  I cut it out, leaving about 1/4" border.

I stamped the phone book image again (on another piece of white card stock) using a permanent ink like StazOn because I knew I wanted to add lots of color over the top, 

and didn't want the stamped ink to smear.

I spritzed the JUICY Cherry Ice Smooch into the handy Tim Holtz Ink Palette, and then used a paint brush to color the heart.

I taped the white phone book piece to the painted canvas board with washi tape, & then adhered the heart with matte medium.

I used the adorable Crafters Workshop Stencil (Sweet Home) to add the sun, clouds and houses.

I "puffed up" the cloud with the Super Heavy Gesso and colored in the sun and houses with "watered down" paint, to allow the Phone Book Stamp to come through.

The white accents on the blue background were made with the Clearsnap Molding Mat, inked up with a Brilliance Ink Pad.

  

I added a little "doodle detail" with an XS Black Pitt Multi Liner Pen, and added dimension to the word cut outs with a black Derewent Inktense Pencil.

The words were stamped with the stamp set below

I found these on sale ($3.50 /half off!) at Jo-Ann Fabrics:)

I love the letter style and the price!

I know I say it all the time, but there is SOOOOO much product in our monthly kits...I find myself using so many things over and over.  The kits are such a great way to "build up your stash" and do so with the confidence, knowing that you are getting great tools and products with all the information you need to use them effectively!  I am always inspired by the other designers on our team, and Tina finds us THE BEST new products out there!  

(no standing at the craft store for hours wondering if you'll like a new product)

It is always a JOY to share with you!

Hope you enjoyed this project:)

Remember to Love Your Neighbor!

Sue

PS.  Stay tuned for our Genuinely Jane Blog Hop this week!

I'm excited to share my Children's Book and Mini Recipe Book!

Tweet

Wood Canvas Panel Using January's Limited Edition Kit

I feel the same every month I receive a Frog Dog kit ..."This is my favorite!!"

I say it and mean it every time and this month is no exception.

Tina knew I would be giddy over the Limited Edition Kit this month, and I am so happy that she allowed me to work with this particular LE:) The Super Heavy Gesso is such a wonderful product and the Viva Colour Croco Crackling Color has become my favorite "secret weapon." I especially love the color that came in the kit...Azure...it is so RICH and VIBRANT!

Every kit item is "right up my ally" and the Clear Snap Molding Mat's are a product I've never worked with and they are SOOOOO versatile!!! 

You'll see....

Let's get into the project.

I began by "loading up" the 10 X 10 wood canvas panel with the Super Heavy Gesso, using a palette knife from the Color Factory palette knife set that came in this GENEROUS kit.

(Tina, how did you know I've been using my small off set kitchen spatula???!

so glad to have a real palette knife!)

While the gesso was wet, I used the Clear Snap molding mat (little love) pressing it into the gesso randomly all over the panel.  

I knew that I was going to make a row of houses on "a hill" so I used the palette knife to separate the space creating "hills" by dragging the knife across the wet gesso. 

NOTE: make sure you always rinse your mats immediately for easy clean up!

Once the gesso was dry (I'm a bit impatient, so I hurried it along with a heat tool)

I applied the Viva Colour Croco Crackling Color in Azure, using the same palette knife.

NOTE: the thicker you apply the crackling color the more cracks you will achieve.

I applied it heavier at the top of the canvas to resemble "sky" and achieve more cracks

and lighter on the bottom because I wanted to see the texture I created with the mats and planned to add a bit of green for the "hills."

Whatever base color is beneath the crackling color, will peek through the cracks it produces.  I knew that I wanted to see white, but you could use any color you like 

to give your piece a totally different look.

In another project I did this month, I put black underneath.

(sneak peek below)

-you can even see some of the impressions made with one of the molding mats:)

Below, the bottom of the canvas has a very light coat with minimal crackle and the molding mat impressions are the star.

Above is the first step to creating the houses for the canvas using the cherry ice smooch spray with the 

The Crafters Workshop stencil sweet home.  

Before spraying the Smooch, roll the applicator between your palms to thoroughly mix all the wonderful shimmer.

I wasn't concerned about neat edges, because I knew I would be cutting these out.

The paper used is 140 lb. cold press watercolor paper, 

but you could use card stock as well.

The stencil includes both the "body" of the houses as well as an overlay with details.

 I used Montana acrylic paint markers (shock light blue & sahara beige)

to add the details. If you haven't tried Montana paint markers they are really worth a try.  I love the control I have in a marker and being able to have that control with paint is so handy...

*fine detail without using a paint brush that will need to be cleaned up!

After the paint markers dried, I outlined and "doodled" with my favorite black pitt multi liner pen  

(xs tip) and added a few more details with a uni-ball signo pen in white.

I cut out each house and then adhered them to the canvas with mod podge.

Next, I added a bit of shimmer to the whole piece with the Smooch spritz spray in ginger ale.

Above you can see more detail added with the very versatile clear snap molding mats using a Brillance stamp pad. 

Not only can you use the molding mats to add great texture to gesso, pastes, mold putty, and clay, but you can use them as a stamp with ink or paint.

You can see the molding mat above stamped on the tall house below using a Brilliance stamp pad.

The Green was then added to the "hills" with a Big brush Pitt pen in earth green.
I "scribbled on some color, then rubbed and smeared with my fingers.

The Super Heavy Gesso gave the clouds great "fluff" and dimension.

To add depth to the houses, they were outlined with a black Pitt Big Brush pen and then quickly smeared with my finger before it was dry.

I stamped each word with a foam stamp set I found on sale for $3 at Michaels onto a piece of cardstock.

(I really like the  font and loved the price!) Each word was cut out then glued on with mod podge and t outlined with the black Pitt Big Brush pen and "smeared" a little with my finger.

Below, you can see the super cute industrial lamp finding found in our kit. I sprayed a few pumps of the Smooch spritz spray (champagne) into the Tim Holtz ink palette found in our kit, then used a small paint brush to paint on the "glow" - both around the lamp and on the lamp itself.  

(*NOTE-with a final spray of acrylic matte sealer to the whole canvas piece, the Smooch on the lamp will be permanent)

I was very happy with the effect.

I added some trees with Pitt Big Brush pens in earth green, green olive and dark sepia. 

The hill border lines were darkened with the earth green

& the added words on top of the hill were done with the white Uni-ball Signo pen.

Don't forget to add color, texture, and depth to the sides of your panel.

The outside edges were highlighted with Pitt Big Brush pens in earth green and black with a touch of white Uni-ball Signo.

Hope you enjoyed this tutorial and are having your own fun with our AMAZING JANUARY KITS!!

Stay tuned for more creative tutorials every day from our team!

It's a joy to share with you!!

Sue

Tweet